total power international, inc. toll free: 877-646-0900(us) ph# (978) 453-7272 www.total-power.com total power international, inc. universal input harmonic correction ac-dc open frame single & multi-output 50-100 watts internal switching power supplies tpvp93 series features: accommodate universal ac sources meet iec 61000-3-2 harmonic correction meet universal safety standards emi meet cispr pub. 22 class b ce marking compliance output specification output voltage: see ratings chart. output current: see ratings chart. output connector: molex v-m connector. output wattage: typ. 50 watts. convection. max. 93 watts under forced air flow. line regulation: typ. 0.1-0.5%. load regulation: main vo1: typ. 1-2.0%. aux. vo2: typ. 3-5.0%. (p.r.) vo2: typ. 2-3.0%. (p.r.) aux. vo3: typ. 2-3.0%. (p.r.) noise & ripple: typ. 1% peak to peak. ovp: installed in main vo1 only. adjustability: available at main vo1. or-ing diodes: installed in vo1 & vo2. overload protection (olp): fully protected against output overload and short circuit. olp set at about 125-150% rating output wattage. consult the factory for olp setting. in application general specification efficiency: typ. 75%. switching frequency: fixed freq. at 65k hz. circuit topology: pwm fixed-frequency forward circuit. transient response: output voltage returns in less than 0.5ms following a 25% load change. safety standard: ul 60950-1/en 60950-1 class i. power density: 2.5-5.0 watts / cubic inch pcb format. 1.7- 3.37 watts / cubic inch u-bracket format. operating temperature: 0 to +50c at full load and 30 cfm forced airflow for full load. storage temperature: -20 to +85c. temperature coefficient: typ. 0.04% /c. cooling: at least 20 cfm forced cooling air is required for 90 watts and up load construction: pcb or u-bracket open frame format. note: due to requests in market and advances in technol ogy, specifications subject to change without notification. specification input specification input voltage: typ. 90-264vac with pfc. input connector: molex v-m connector. input frequency: 47-63hz. inrush current: typ. 23a @230vac. input current: typ. 1.5a@115vac, 0.8a@230vac. dielectric withstand: meet iec 60950-1. emi: meet cispr pub. 22 class b. hold-up time: typ. 43ms @ 115vac & 230vac. over temp. protection (otp): optional for u-bracket format. power factor correction: meet harmonic correction per iec 61000-3-2.pf typ.0.98-0.99. earth leakage: less than 0.63ma.
total power international, inc. toll free: 877-646-0900(us) ph# (978) 453-7272 www.total-power.com output voltage / current ratings chart mechanical dimensions: mm [inches] weight: pcb 358.0g(12.6 oz.) u-bracket 541.0g(19.0 oz.) single output main vo1 ? @ tpvp93-s033250 12.0a 3.3v 25.0a tpvp93-s050200 10.0a 5.0v 20.0a tpvp93-s120085 4.2a 12.0v 8.5a tpvp93-s150068 3.4a 15.0v 6.8a tpvp93-s240043 2.1a 24.0v 4.3a tpvp93-s280038 1.8a 28.0v 3.8a tpvp93-s360030 1.5a 36.0v 3.0a tpvp93-s480022 1.2a 48.0v 2.2a dual output main vo1 ? @ tpvp93-d050i 6.0a +5.0v 10.0a 2.0a +12.0v 4.0a tpvp93-d050k 6.0a +5.0v 10.0a 1.6a +15.0v 3.2a TPVP93-D050M 6.0a +5.0v 10.0a 1.0a +24.0v 2.0a tpvp93-d033i 8.0a +3.3v 12.0a 2.0a +12.0v 4.0a tpvp93-d033k 8.0a +3.3v 12.0a 1.6a +15.0v 3.2a tpvp93-d033m 8.0a +3.3v 12.0a 1.0a +24.0v 2.0a triple output (pcb version) main vo1 ? @ tpvp93-t050ii 4.0a +5.0v 10.0a 1.5a +12.0v 3.0a 1.0a -12.0v 1.5a tpvp93-t050ie 4.0a +5.0v 10.0a 1.5a +12.0v 3.0a 1.0a -5. 0v 1.5a tpvp93-t050mi 4.0a +5.0v 10.0a 0.8a +24.0v 1.5a 1.0a -12.0v 1.5a tpvp93-t050kk 4.0a +5.0v 10.0a 1.2a +15.0v 2.4a 0.8a -15.0v 1.2a tpvp93-t033ii 5.0a +3.3v 12.0a 1.5a +12.0v 3.0a 1.0a -12.0v 1.5a tpvp93-t033kk 5.0a +3.3v 12.0a 1.2a +15.0v 2.0a 0.8a -15.0v 1.2a symbol: "
|
